Product Information
Applications Features |
The K Series Bullet® Bare Fiber Adapter Kit comes with the three most commonly used connectors in the industry (FC, ST & SC) and includes the patented QuickLINK® Universal Mating Sleeve. The QuickLINK® allows for greater flexibility when connecting the Bullet® to any patch/jumper cable with a 2.5mm ferrule or FC, ST, SC, DIN or E2000 connectors.
Many times when using a Bare Fiber Adapter, connections to jumper cables that are connected to an OTDR is quite common. Instead of carrying around a variety of mating and hybrid adapters, one QuickLINK® will allow your Bullet® to connect to any cable with an FC, ST, SC, DIN or E2000 connector.
Each kit includes the following:
Many times when using a Bare Fiber Adapter, connections to jumper cables that are connected to an OTDR is quite common. Instead of carrying around a variety of mating and hybrid adapters, one QuickLINK® will allow your Bullet® to connect to any cable with an FC, ST, SC, DIN or E2000 connector.
Each kit includes the following:
|
|
Optional Accessory
The Precision Fiber Stop (PFS®) is an accessory that assists in aligning the fiber flush with the end of the connector face on the Bare Fiber Adapter. A vital accessory when connecting directly to test equipment. Protects the cleaved fiber end and equipment from damage. The PFS® is included in the kit if the part number ends with a "P". Please refer to the part numbers tab above for additional information.
| K245 | Bullet® Bare Fiber Adapter Kit (FC/ST/SC/QL) - Singlemode |  |
| K356 | Bullet® Bare Fiber Adapter Kit (FC/ST/SC/QL) - Multimode | |
| K245P | Bullet® Bare Fiber Adapter Kit (FC/ST/SC/QL/PFS) - Singlemode | |
| K356P | Bullet® Bare Fiber Adapter Kit (FC/ST/SC/QL/PFS) - Multimode | |